PELCO - CM9760 CPU Redundancy Model S. No. Description CM9760-SEU S28451 Serial expansion unit; supports switching of an additional 16 data ports.
Model S. No. Description CM9760-SAT-X S27309 Remote 16 x 4 Satellite switcher for CM9760 matrix
Model S. No. Description CM9700-CC1 S38634 CPU Controller complete
Model S. No. Description CM9760-HS S28417 CPU Changeover system for CM9760 & CM9740   Continuous Monitoring of Active and Standby CPUs Automatic or Manual Switching to Standby CPU in the Event of a Failure Diagnostic LEDs Show CPU Status Audible Alert in Case of CPU Failure Manual Control of Diagnostic Monitor and Keyboard Allows for Servicing/Programming of Either CPU Without Interrupting System Operation Automatically Routes Data Lines for Keyboards, Bays, and Accessories to Standby CPU Backward Compatible With Older Matrix Systems Fits a 19-Inch Standard Rack
PELCO - CM9760 & CM9740 Alarm Interface Unit Model S. No. Description CM9760-ALM S23707 Alarm I/F unit with 64 n/o or n/c inputs   Up to 4 units can be chained together giving a total of 256 alarms, accessed & supported from a single sercom port. . Note: Larger Inputs & Looping Inputs & Larger outputs for the Pelco CM9760 systems are available on application To optimise the performance of the Pelco CM9760 System - we recommend setup by qualified personnel. Please contact your Pacom office to obtain a quote for set up cost.
PELCO - CM9760 Relay Interface Unit Model S. No. Description CM9760-REL S23909 CM9760 Relay Interface Unit   Provides 64 single throw contact outputs for operating different peripheral equipment Each Unit Provides Up to 64 Single-Pole, Single-Throw (SPST) Contact Outputs for Operating Different Peripheral Equipment Relay Output Contacts Can Be Configured for Normally Open (Factory Default) or Normally Closed Operation Memory Feature Allows Relay Groups to Retain or Hold Their Contact Position in the Event of a Power Failure or Front Panel Reset Multiple Units Can Be Daisy-Chained to Extend the Number of Relay Contact Outputs Controlled From a Single Port On the CC1 (Over 5,000 Relay Outputs Can Be Configured) The Relay Unit Can Be Remotely Placed Up to 4,000 Feet (1,219 meters) From the Controller (RS-422 Operation) All of the above relay switching functions can be configured from the 2040/9760MGR setup files
PELCO - CM9760 & CM9740 Data Translator and High Level Interface Model S. No. Description CM9760-DT-X S24861 CM9760 & CM9740 Data Translator and High Level Interface   The Pelco CM9760-DT Data translator is a protocol translation device that isolates whilst interfacing the Pelco CM9760 with any device capable of communication in ASCII. The Data Translator will enable Building Management & Security Systems to easily interface & control the Pelco CM9760.
Model S. No. Description CM9760-DT4-X S28512 Same as CM9760-DT-X except with RS422 output port
PELCO - CM9760 & CM9740 DMR Data Manager Model S. No. Description CM9760-DMR-X S28289 CM9760 & CM9740 DMR Data Manager   The Data manager provides you with a four to one expansion of the number of data (sercom) ports available on a CM9760 or CM9740 CPU. It can also be used on the same matrixes in the following 3 applications: 1. Expanding the number of cameras controlled through one port. 2. Expanding the number of keyboards connected to one port. 3. To interface up to 4 networked CPU’s to control a common group of cameras.
PELCO - CM9760 & CM9740 PTZ Coaxitron Code Translators Model S. No. Description CM9760-CXT-A S25483 CM9760 & CM9740 PTZ Coaxitron Code Translators   Coaxitron Translator for CM9760 with up to 16 Coaxitron capable receiver/drivers Allow Coaxitron Control From Any RS-422 “P” or “D” Protocol Device 16 Looping Video Inputs Allow for Easy Connection Between Switch & Cameras. Send PTZ Control Commands on a Camera’s Video Cable Fits a Standard 19-Inch Rack Mount 230 VAC 44.5 H x 482.6 W x 270 D mm